Filter
Top Products
Maintaining Your Machine
97
8
Maintaining Your Machine
If the exposure glass, exposure glass cover, ADF or ARDF belt is dirty, copy clar-
ity may be reduced. Clean these parts if they are dirty.
R
CAUTION:
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ Cleaning the machine
Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth
to remove the water.
Cleaning the Exposure Glass
This section describes how to clean the exposure glass and scanning glass.
Clean 1 and 2.
• Fire and breakdown can result from heavy accumulation of dust inside this
machine. Consult your service representative for details about and charges
for cleaning the machine's interior.