Filter
Top Products
Replacing Consumables and Maintenance Kit
47
Attach the center projection of the new friction pad to the spring, and then
align the projection of both sides of the friction pad to the holes of the paper
tray. Then push the friction pad as shown in the illustration until it clicks.
After pushing in the friction pad, try pushing it several times to check it is prop-
erly installed. If it jumps back into position due to the force of the spring, it is
properly installed.
G Push the friction pad until it locks securely.
H If your printer is equipped with the optional paper feed unit(s), follow the
same procedure when replacing the friction pad.
Replacing the Transfer Roller
A Open the front cover by pushing the front cover release button.