Filter
Top Products
Adjusting the Printer
73
F Confirm the position of the image on the test sheet, and then adjust the
registration value.
G Press the {U} or {T} key to display [Adjustment], and then press the {#
Enter} key.
H Press the {U} or {T} key to set the registration value (mm).
I Press the {U} or {T} key to set the digit of the registration value (mm).
Increase the value to shift the print area in the positive direction, and decrease
to shift in the negative direction.
❒ Pressing the {U} or {T} key makes the value increase or decrease by 1.0
mm steps.
J Press the {# Enter} key.
K Press the {Escape} key.
Adjustment:
Horiz: Tray 2
Horiz: Tray 2:
(-4.0 +4.0) 0.0