Filter
Top Products
Installing Options
49
❖ 1394 Interface Cable (6 pins x 4 pins)
❖ 1394 Interface Cable (6 pins x 6 pins)
B Turn off the power of the printer, and then unplug the printer's power ca-
ble and the interface cable.
C If the duplex unit is attached, push down the lever on right side ( ) and
pull out the duplex Unit until it stops ( ).
If the duplex unit is not attached, go to the following steps.
D Remove the two screws holding the controller board in place.
❒ Use a coin or similar object if the screws do not turn easily.