Configuration
91
IEEE 1394 Configuration
Use this procedure to configure the printer for use in an IEEE 1394 environment.
The following table shows the control panel settings and their default values.
These items appear in the [Host Interface] menu.
❒ If DHCP is in use, “IP Address1394” and “Subnet Mask1394” are automatical-
ly set.
IP over 1394
A Press the {Menu} key.
The [Menu] screen appears on the display.
B Press the {U} or {T} key to display [Host Interface], and then press the {#
Enter} key.
The interface setting menu appears.
C Press the {U} or {T} key to display [IEEE 1394 Setup], and then press the
{# Enter} key.
Setting Name Value
DHCP On
IP Address1394 011.022.033.044
Subnet Mask1394 000.000.000.000
IP over 1394 Active
SCSI print Active
Bidi-SCSI print On
Menu:
Host Interface