Filter
Top Products
Installing Options
69
D Slowly insert the hard disk drive while aligning it with the top and bot-
tom rails in the printer until it stops.
E Fasten the two screws (using a coin, etc.) to fix the hard disk drive.
❒ After finishing installation, you can check whether the hard disk drive is
properly installed: Print the configuration page from the “List/Test Print”
menu. If it is installed properly, you will see “Printer Hard Disk Drive” for
“Controller Option”.
❒ If the hard disk drive is not installed properly, repeat the procedure from the
start. If you cannot install it properly even after reinstallation, contact your
sales or service representative.
For printing the configuration page, see p.32 “Test Printing”.