Filter
Top Products
7
F
AXING
7.5
DRPD Mode
You can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature, which
enables a user to use a single telephone line to
answer several different telephone numbers. In
this menu, you can set the machine to
recognize which ring patterns to answer. For
details about this feature,
see
page 7.17.
DT Detection
The Dial Tone Detection feature can ensure that
your telephone exchange is ready to receive
the dialing.
Select
On
if you want to set your machine to
detect the dial tone before your machine start
dialling.
With this feature set to
Off
, the machine start
dialling without checking the dial tone from
your telephone exchanger.
There are regions where the dial tone cannot
be detected by your machine. If the Dial Tone
Detection feature is set to
On
and dialing does
not start automatically, set this feature to
Off
.
Display Mode
You can select
Copy Mode
or
Fax Mode
as
the Display Mode.
The factory default setting is
Copy Mode
,
which allows you to enter the number of copies
using the number keypad. In this mode, the
Reduce/Enlarge percentage(%) and the
number of copies are always displayed. To
enter a fax number in this mode, you must first
press the
Facsimile
button, and then enter
number using the number keypad.
You can change the display mode to
Fax
Mode
, which allows you to enter a fax number
using the number keypad. In this mode, the
date and time, memory status percentage(%),
and fax reception mode are always displayed.
To set the number of copies in this mode, you
must first press the
No. of Copies
button, and
then enter the number using the number
keypad.
In either mode, faxes can be both sent and
received, and the one-touch buttons can be
used to start scanning originals immediately.
Option Description