Filter
Top Products
2
G
ETTING
S
TARTED
2.43
Repairing Software
Repair is required if your installation fails or the software does
not work properly. This Repair procedure does not physically
repair SmarThru software.
Printer driver, Scanner driver, Printer Settings Utility and Set IP
programs could be repaired.
1
Start Windows.
2
From the
Start
menu select
Programs
or
All Programs
→
Type 103
→
Maintenance
.
3
Select
Repair
and click
Next
.
N
OTES
: If your printer is not already connected to the computer,
the following window will appear.
• After connecting the printer, click
Next
.
• If you don’t want to connect the printer at this time, click
Next
,
and
No
on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
4
Select the components you want to reinstall and click
Next
.
If you select
Printer Driver Type 103 PCL 6
, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click
Next
.
b. If the test page prints out correctly, click
Yes
.
If it doesn’t, click
No
to reprint it.
5
When the reinstallation is done, click
Finish
.