Filter
Top Products
G
ETTING
S
TARTED
2.46
Using the Set IP
The Set IP can detect printers in the same network and display
the network information. In addition, this application can
configure the network information of the printer that has own
network interface card.
Installing Set IP
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM driver does not automatically run:
Select
Run
from the
Start
menu, type
X:\setup.exe
in the
Open box (Where "
X
" is the drive letter for the CD-ROM
drive) and click
OK
.
2
Click
Next
.
3
Select
Custom installation
or
Typical installation for a
network printer
. Click
Next
.
4
Select your printer and then click
Next
.
N
OTES
: If your printer is not already connected to the computer,
the following window will appear.
• After connecting the printer, click
Next
.
• If you don’t want to connect the printer at this time, click
Next
,
and
No
on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5
Check
Set IP
and then click
Next
.