Filter
Top Products
16
CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL
Quad Video Remote Unit cabling
(Refer to Figure 3 and Figure 8)
Figure 8. Quad video cabling
For Quad video systems, the local units consist of two dual video
units. Connect these units as described in the dual video section.
The Remote unit’s KVM station’s keyboard, monitor, and mouse
cables are connected directly to the CrystalView Plus keyboard,
monitor, and mouse connectors. Connect a second monitor to view
the second video source. Connect a third and fourth monitor to view
these video sources.
Local unit to Remote unit cabling
Connect up to 1,000 feet of CAT-x cable from the Local Dual Units
RJ45 front panel connector to the Remote Units RJ45 front panel
connector. Connect a second, third, and fourth CAT-x cable from
the Local Dual Units to the Remote unit for the second, third, and
fourth video source. (See Figure 8)
Video #4
Video #3
Video #2
Video #1
Quad video systems consist of two
dual video local units and a single
quad video remote unit. Video
source #2, #3 and #4 route only the
video to the remote unit.