Filter
Top Products
36
CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL
Appendix C. Rack mount instructions
The optional rack mount kit includes the following items:
n Two black anodized mounting brackets or
3 unit mounting shelf.
n 6 - 32 x 3/8” flat head mounting screws.
To rack mount a single unit, attach the two rack mounting brackets
to your Unit with the short flange against the Unit or mount up to
three units on the Rackmount shelf. Do not over tighten the screws
used to mount the Unit to the mounting brackets or shelf. Use only
the hardware provided, using hardware other than that provided
could cause damage to the electronics and/or result in loss of
mounting integrity. Secure the mounting brackets or the shelf to the
rack using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 0
ο
C to 40
ο
C.
b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to
prevent instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain
relief for all cables.
e). Provide a grounded power source to all Units. Pay special
attention to overall branch circuit load ratings before
connecting equipment to this source. Overloaded circuits are
potential fire hazards and can cause equipment failures or
poor performance.