Filter
Top Products
INSTALLATION
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 5
Installation
Please refer to the safety section first before proceeding with any installation or configuration of
the QuadraVista.
Installation of the QuadraVista consists of connecting the computers and KVM workstation to the
unit. The following steps can be used as a guideline for installing your QuadraVista. It is
recommended that you locate the QuadraVista as close as possible to the computers being
connected.
Installing the KVM station
Connect your KVM user station to the QuadraVista as shown in Figure 3. Connect a USB mouse
and USB keyboard to the corresponding USB ports on QuadraVista. If a PS/2 keyboard and
mouse are used, a PS/2 to USB converter must be used.
Next, connect a VGA (HD15F) or DVI monitor to the DVI-I port. If a VGA monitor is used, a VGA
(HD15F) to DVI converter cable must be used.
Figure 3. KVM Installation