Filter
Top Products
34 QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL
Computer / Reset PS/2
Figure 32. Computer / Reset PS/2
Computer / Change EDID/DDC
Figure 33. Computer / Change EDID/DDC
Select Reset PS/2 when the keyboard or
mouse have been disconnected or get out
of sync.
Use the arrow keys or the “+” and “-“ keys
to select the channel to reset and press
enter / select.
Select Change EDID / DDC to add two
selectable video modes to the list of video
modes available at each of the four video
ports.
Use the left, right arrow keys () to
select the first video mode to add. Once
selected, use the up, down arrow keys
() to select the second video mode to
add. Use the left, right arrow keys ()
to select the second video mode to add.
When both video modes have been
selected, use the up, down arrow keys
() to select signal and the left, right
arrow keys () to select analog or
digital.
With all entries completed, select “WRITE”
and press ENTER / SELECT and the
window shown on the right in Figure 34
will open.
(Procedure continued on next page)