Filter
Top Products
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 19
Additional security features are listed below for each security level. These features are in
addition to the OSD security levels listed above.
Security level 8 (most limited level) allows you to work only on pre-selected channel (computer)
in a predefined display mode (Quad / Full / PiP). Except the security menu, where you can
change the security level there are no other operations available.
Security level 7 is the same as security level 8. All OSD windows are available that have
information contents only (showing display modes, active channels and settings):
Security level 6 is the same as security level 7 with the addition of:
Active channel setting using front panel, keyboard, or mouse commands
Channel selection in Quad Mode using front panel PiP button
Security level 5 is the same as security level 6 with the addition of:
- Display mode setting (Quad / Full / PiP) using front panel buttons,
- keyboard or mouse commands
Security level 4 is the same as security level 5 with the following OSD additions:
- Modify PiP settings using HotMouse menu
- System - OSD Position
- Mode - PiP / Start features
- Configuration - Recall
- Video - format
Security level 3 is the same as security level 4 with the following OSD additions:
- System – OSD language
- Video – All video OSD features
Security level 2 is the same as security level 3 with the following OSD additions:
- System – Hotkey / Hotmouse / Quad Mode
- Console - keyboard
Security level 1 is the same as security level 2 with the additions of:
- Set video output to VGA using keyboard command (Hotkey V) or front panel buttons 1+2
- System – Disable channel
- Console – Multi-Monitor / Video output
- Computer – Mouse / Reset PS/2
- Video – Video input