Filter
Top Products
COMMANDS
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 7
Front Panel LEDs / Push-Button Commands
The front panel consists of 6 push buttons and 6 corresponding LEDs. The LEDs provide a visual
representation of what mode the QuadraVista is in, what computer channel is selected, and what
channels are receiving a video signal. The push buttons select a channel, select the quad or pip
mode, and invoke the on-screen-menu system.
LEDs 1-4 indicate which channel is selected. If the LED is green, the corresponding channel is
selected. If the LED blinks green, there is no video signal present on that selected channel. If
the LED is yellow, a video signal is present on that channel but not selected.
The Quad LED lights up green when the system is in the Quad mode. No light and the system is
in the full screen mode.
The PiP LED lights up green when the unit is in the PiP mode. No light when PiP is not selected.
(Note: LEDs 1-4 only indicate video status, not keyboard and mouse)
Channel 2 selected, channels 1, 3, and 4 receiving video
Push buttons 1-4 are used to select a channel and display in full screen, the connected video
source. If your system is in the Quad mode and you press buttons 1, 2, 3, or 4, that channel is
selected and the system automatically switches to full screen mode. Full screen or PiP mode
displays are not affected when a channel is selected.
Pressing the Quad button turns “ON or OFF” the Quad mode.
The PiP button activates different functions depending on what screen mode is active (Full, Quad,
or PiP mode).
In Full screen mode, the PiP button enables or disables the PiP feature.
In the Quad screen mode, pressing the PiP button enables a channel select window (Figure 5 ).