Filter
Top Products
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 35
Figure 34. EDID Programming
When the window to the above right
displays and before pressing ENTER /
SELECT twice, disconnect the console
monitor cable and the computer monitor
port to program. Connect a DVI male to
male cable from the video output to the
computer video input to program (1-4).
The video will go blank and programming
must be executed blindly. When the DVI
cable has been connected, press ENTER
/ SELECT twice to program the additional
video modes. Reconnect the console
monitor and computer monitor cable and
the display to the right will display.
Repeat this procedure for the other three
video input ports if necessary.