Filter
Top Products
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 39
Execute the Serial Communication software and the window shown below will display.
Click on the ICON to connect and display the OSD on the remote computer
Remotely navigate within the OSD menu system from the remote computer the same way as you
would using the local console. All OSD menus can be accessed using the arrow keys and the
Enter / Select key.
DCP Synchronizing Multiple Units
In systems that use multiple QuadraVista’s, the display mode can be synchronized so all units are
the same display mode. To accomplish this, first display the OSD and navigate to the “Control”
section (System, Control). Use the up/down arrow keys to select “Synchronization”, then exit the
OSD.
Each time you restart a V-Switch quad set to synchronization, it will send all its settings to the
next connected device. This process also takes place after activating Synchronization in the
OSD menu.