Filter
Top Products
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 13
When the multiple key and double click key assignment has been made, exit the menu system
and these values will be saved.
If you assigned the Control, Alt, and Shift keys (menu value = “Yes”) to be the multiple key
HOTKEY, then you must press these three keys simultaneously plus the command key.
If the shift key was assigned to be the double click HOTKEY, then you must press the shift key
twice then the command key.
System / HotMouse
The Hotmouse works similarly to the HOTKEY function where an operation is activated using only
the mouse. To use the Hotmouse feature, it first must be enabled. Navigate to the SYSTEM /
Hotmouse window and enable the Hotmouse (set to “Yes”) and set the timeout value (1 to 30
sec.). This determines how long the selection window is displayed.
Figure 7. System HotMouse
To activate the Hotmouse cursor feature, move the mouse rapidly in alternating horizontal
directions four times (Note: the Hotmouse must be enabled for this feature to function).
→ ← → ← or ← → ← →
The Hotmouse cursor will change depending on the view mode. Activating the Hotmouse in the
Full screen mode will temporarily display the PiP images of the non-selected channels (see
below). Moving the cursor to a PiP image and clicking on the left mouse button will switch, full
screen, to that channel.
Enabling the HOTMOUSE feature, you
can perform several functions using only
the mouse:
(Switch channels, size PiP window, and
other features)