Filter
Top Products
46 MM2211 Wireless Broadband Gateway User’s Guide 8000013, July 2006
Updating the Firmware
T
Figure 17—Updating the Firmware
Automatic Firmware Upgrade
The Host Name, User Name, and Password shown in the window of Figure 17 have been preconfigured to
automatically access Ruckus Wireless’s firmware update website. You can alternatively change these parameters
to access a different firmware upgrade website.
You can perform an immediate firmware upgrade by clicking Firmware Upgrade Now. The MM2211 will
proceed with a firmware upgrade at the host specified.
The default for checking for new updates is 12 hours, as shown in the Check Interval box. You can set this
to a longer or shorter interval as required.
1. If you are satisfied with the automatic firmware upgrade parameters, click Update. The system will update
the firmware as required.
Manual Firmware Upgrade
Contact your service provider for more information about Web sites or TFTP/FTP sites used to store
firmware images for the MM2211 Gateway.