Filter
Top Products
8000013, July 2006 MM2211 Wireless Broadband Gateway User’s Guide 47
Updating the Firmware
!
CAUTION:—If you have recently made configuration changes to the MM2211 Gateway, make sure to reboot
the system (see “Rebooting the System” on page 50) first so that your changes are preserved. Then update the
firmware.
To choose the manual firmware upgrade option, proceed as follows:
1. In the Auto F/W upgrade box of Figure 17, check Disable.
2. The window of Figure 18 appears
Figure 18—Manual Firmware Upgrade Window
To download a firmware image from a Web site and use it to update the firmware on the MM2211 Gateway:
1. Point your browser to the Web site where the MM2211 Gateway’s firmware is stored, and download the
firmware image to a folder on your hard drive. Note the location of the downloaded image.