Filter
Top Products
Random Access Adjustment Mode
6-16
Convergence Adjustment
Convergence adjustments affect both the horizontal and vertical lines
of the setup pattern. These adjustments are performed on the red
image while superimposed on the green image and then on the blue
image while superimposed on the green image. Start with the Coarse
Convergence Adjustments and finalise with the Fine Convergence
Adjustments.
Coarse Convergence Adjustment
Highlight 'Red on Green' under the Coarse Convergence item and
press ENTER. The Coarse Convergence menu will be displayed.
The following items are possible:
- Horizontal sides: adjust the vertical lines, within a certain area, on
both sides without influencing the lines on the middle of the image.
- Vertical corners: adjust the horizontal lines in the four corners,
within a certain area, without influencing the middle of the image.
25
23 9 15 17
24
22 8 14 16
5
4123
20 18 6 10 12
21 19 7 11 13
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
Select with or
then <ENTER>
<EXIT> to return.
COARSE CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return
HORIZONTAL SIDES
VERTICAL CORNERS
The screen area is divided into 25 areas.
Select with or
then <ENTER>
<EXIT> to return.
COARSE CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return
HORIZONTAL SIDES
VERTICAL CORNERS
Repeat for 'Blue on Green.'
Horizontal Sides
To make a coarse adjustment of the red or blue vertical lines in zone
3 and 5 simultaneously, Highlight 'Horizontal lines' and press ENTER
to start the adjustment.
Hint :
- look to the end of scan and adjust until the red or the blue vertical
lines are on the green lines or as close as possible to the green
lines.
- during these adjustments, the horizontal convergence adjustments
in zones 2, 3, 4, and 5 will be set to midposition (barscale 50).
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT