Filter
Top Products
APPENDIX
A.17
APPENDIX
A.16
Your printer supports Macintosh system with a built-in USB
interface. When you print a file from Macintosh, you can use the
PrinThru driver to support your printer’s major printing features.
Using Your Printer with Macintosh
To use your ML-1200 Series printer and its software with a
Macintosh, your system should have:
Macintosh Hardware Requirement:
• One of the following Macintosh models:
-Power Macintosh series (with external network connection)
-Power Macintosh G3, G4
-iMac series
-PowerBook series
-iBook series
• USB interface
Macintosh System Requirement:
System 8.0 or later
System Requirements
You can connect the printer to your Macintosh using the USB
interface.
1
Turn off the printer and computer.
Installing Software for Macintosh
Connecting to
Macintosh
2
Hold the USB cable so the icon faces up and connect it to
your printer’s USB connector.
3
Connect the other end of the cable to an available USB port
on your Macintosh computer. If you have any connection
problems, please refer to your computer documentation.
Note: If you are using a USB hub, connect the printer’s cable to
the first tier of the hub or the printer may malfunction. If
the printer doesn’t work with the hub, connect it directly
to the USB port.
Using Your Printer with Macintosh
Installing Software
1
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click the Samsung ML-1200 Series on your
Macintosh desktop.
4
Select the correct language, then click Continue.
5
Click Install.
6
After installation is complete, click Quit.