Filter
Top Products
P
RINTING
F
ROM
DOS A
PPLICATIONS
D.2
About the Remote Control Panel
DOS users have access to many printer features through specific
DOS printer drivers; however, many software manufactures do
not develop printer drivers for their software programmes. Your
printer provides the software control panel for improved printer
control when DOS printer drivers are not available or when
certain print settings are not available through DOS software
programmes.
N
OTE
: The printer’s Remote Control Panel is not a printer driver.
It should be used to set print settings that are not available
through DOS software programmes. Printer drivers are supplied by
the manufacturers of your DOS software programmes. If your DOS
software Programme does not include a printer driver for your
printer, contact the manufacturer of the software or use one of the
alternate printer drivers.
Installing the Remote Control Panel
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, type x:\setup.exe in the
Open box (where x is the drive letter for the CD-ROM drive)
and click OK.
N
OTE
: When the following window opens, connect your printer to
the computer and turn the printer on. Then click Next.
If the printer is already connected and turned on, this screen does
not appear. Skip to the next step.