Filter
Top Products
U
SING
THE
C
ONTROL
P
ANEL
2.18
Network Menu
This menu lets you configure the network interface card
installed in your printer according to how the network is set up.
You can upgrade the firmware of the network interface card, and
print the configuration.
NOTE
: This menu only appears when a Network Card is fitted (CLP-
550N or CLP-550 with optional Network card).
(*: the default setting)
Item Explanation
Config Network
Sets whether or not you want to
configure the network.
If you select Yes, you can configure
the TCP/IP and Netware menus.
If you select Yes, the following options
are available: Config TCP, Config
802.11b, AppleTalk and Netware.
Config TCP
Select whether you want to set the IP
address or not.
If you select Yes, you can configure
the IP address item.
If you select Yes, the IP Get Method,
option appears on the display. You can
select how to get the IP address.
IP Get Method
You can set this item only when you set
the Config TCP to Yes.
• BOOTP: The BOOTP server allots the
IP address to you automatically.
• DHCP: The DHCP server allots the IP
address to you automatically.
• Static: You can enter IP address,
subnetmask, and gateway manually.
Options: Yes, No*
Options: Yes, No*
Options: BOOTP, DHCP, Static*