Filter
Top Products
15
5. AML Setting Using AP Manager
① AML stands for Automatic Multi-link. Using one slot of AP as Wireless Bridge
and the other as Access Point, it is used to connect several divided networks
into one. It connects several [Slave]s with one main [Master]. In this case, you
can consist Wire Network by connect Hub to Ethernet Port of AP or can
connect Ethernet, ADSL and Cable Modem to it.
② After executing AP Manager, click [Radio] tab on “Tab Bar”. After selecting
slot to set AML on “List Box” using mouse(by click the shape of Wireless
LAN Card), set Operation Mode with “Automatic Multi-link” on [Radio]
Dialogue Box.
③ When “Automatic Multi-link” on [Radio] Dialogue Box is selected, [Automatic
Multi-link] Box, which sets AP status(Master or Slave) in AML mode, will
appear.
<AML Slot Area>
[Master]
[Slave] [Slave]
<AP Slot Area>
(Hub)
<Wire Network using Hub>
<AP Slot Area><AP Slot Area>
Internet Network
<AP Slot Area>