Filter
Top Products
44
11. Encryption Setting Using AP Manager
① After executing AP Manager, select [Security] tab on “Tab Bar” to set
encryption. Then, select “Encryption”.
② Encryption should be set separately for each slot. After select slot(the shape of
Wireless LAN Card described) to set encryption on [Selected AP’s Info] Group
Box of “List Box”, and select “Encryption” on [Security] Dialogue Box.
③ Select either “64(40)-bit Key” or “128-bit Key.” WEP Key could be set
separately for each slot. In this example, Slot A is set “64(40)-bit Key” and Slot
B is set “128-bit Key”.
Start Encryption Setting
Confirm Selected Slot
Confirm Selected Slot
Select
Encryption