Samsung SWL-4000AP Network Card User Manual


 
22
7. NAT Setting Using AP Manager
NAT stands for Network Address Translation, and it is used to establish private
network domain. Using NAT, any desktop or notebook PC, which are
connected to AP, may freely use any private IP Address. In this case, the
private IP Address must have same Network Address assigned for NAT IP
Address.
For Example) NAT IP Address : 172.16.0.1
Station IP Address #1 : 172.16.0.100
Station IP Address #2 : 172.16.0.150
In this case, Network Address is 172.16.0.X.
After you select [Server] tab of AP Manager, select [NAT] on Dialogue Box. In
this case, enter Gateway Address you select on “IP Address” of [NAT]. The
default setting value is “172.16.0.1”.
Select [Server] Tab
NAT Setting
IP Address and
Subnet Mask Setting