Samsung SWL-4000AP Network Card User Manual


 
20
[Age Time] on [Bridge Table] Management Box shows cycle of AP refreshing
“Bridge Table”. The use of Default Values is recommended.
After selecting Station Type you want with Radio button to refresh Stations
connected to current AP, click [Refresh Bridge Table] button to confirm.
[Bridge Table] Management Box enables confirmation of Wired and Wireless
Stations connected with current AP only.
You can block Protocol you do not want using [Protocol] Management Box.
When Protocol use is limited, some specific applications may not operate.
Therefore, before setting, consult your system administrator. “Disabled” of
Default Value is recommended.
Selecting “Disabled” checkbox on [Protocol] Management Box leads to
“Enabled”. Then, whole [Protocol] Management Box is activated to enable
selecting.
If you select any Protocol what you do not want among Protocols shown on
[Protocol] Management Box, a phrase of “Pass” changes to “Drop”.
Radio Button
for Selecting
Station T
yp
e
Confirm Refresh
Bridge Table
Number
of
Stations
MAC Address Information
of Connected Stations