Filter
Top Products
Spinpoint M8U-Internal Product Manual REV 3.4
80
INSTALLATION
6.3.6.4.7 Endpoint Descriptor
Each endpoint used for an interface has its own descriptor. This descriptor contains the information required
by the host to determine the bandwidth requirements of each endpoint. An endpoint descriptor is always
returned as part of the configuration information returned by a GetDescriptor(Configuration) request. An
endpoint descriptor cannot be directly accessed with a GetDescriptor() or SetDescriptor() request. There is
never an endpoint descriptor for endpoint zero. Table 6-16 shows the standard endpoint descriptor.
Table 6-16: Standard Endpoint Descriptor