Filter
Top Products
27
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 83-85.
Main Menu
Sub-Menu
e Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Dynamic, Standard, Cinema, and Image 1-10 (p.48).
r Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color management/Color temp./
White balance (R/G/B)/Offset(R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Reset/Store]
(pp.41-43).
For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/
Color temp./White balance (R/G/B)/Offset (R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/
Noise Reduction/Progressive/Reset/Store] (pp.49-51).
w PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
t Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom
adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.44-46).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural
wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 52-53).
q Input
Used to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.33-35).
u Information
Displays the input source information: Input, H-sync freq., V-sync freq., Screen, Lamp mode, Lamp control, Lamp
interval, Lamp 1, Lamp 2, Lamp 3, Lamp 4, Language, Filter counter, Power management, Key lock, PIN code
lock, Shutter management, Remote control, SERIAL NO. and Option control No. (p.30).
o Guide
The key operation is displayed.
y Setting
Used to set the projector’s operating configurations (pp.54-69).
i Network
See the owner’s manual of “Network Set-up and Operation”.
Main Menu
q
w
e
r
t
y
u
i
o