Filter
Top Products
88
Appendix
The projector is detecting abnormal condition.
Indicators
Projector Condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
SHUTTER
blue
LAMP
REP.
orange
If the Filter counter reached a time set in the timer
setting, the icon as shown in Fig.1 appears on the
screen and the WARNING FILTER indicator on the
top panel lights up. Replace the filter as soon as
possible. If the projector reaches a time set in the
timer setting, the icon shown in Fig. 2 appears on
the screen and the WARNING FILTER indicator
lights up. Replace the filter as soon as possible.
If the filter is clogged, the icon as shown in Fig.3
appears on the screen and the WARNING FILTER
indicator lights up. Replace the filter as soon as
possible.
✔Note:
• Fig.1, Fig.2 and Fig.3 icon will not appear when
the Display function is set to “Off” (p.54), or during
“Freeze” (p.31).
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center. Do not
leave the projector on. It may cause an electric
shock or a fire hazard.
The shutter is out of control.
The shutter is out of control. (The projector is in the
cooling mode.)
The shutter is out of control. (The projector is in the
stand-by mode.) In that case, contact the service
center immediately.
Fig.1
Fig.3
Fig.2
✽
✽
✽
✽
✽
✽
✽
✽✽ ✽
✽