Filter
Top Products
PARTS NAMES
FRONT PANEL
This unit is not equipped with a power switch. The power is turned on/off when the supplied power cord is connected/disconnected at
the power source.
1 POWER indicator
2 Camera SELECT buttons and camera indicators
Use these buttons to select the picture from the
corresponding camera. Also, when in still image, sequential
display, 4 divisions split screen or multi-display screen
modes, press one of these buttons to return to the normal
picture full screen display of the corresponding camera.
3 PLUS button and indicator
4 QUAD button and indicator
In sequential display, full screen display or multi-display
screen modes, press this button to switch to 4 divisions
display screen. Press repeatedly to switch to subsequent 4
divisions screens.
5 MULTI button and indicator
6 LIVE button and indicator
Press this button to select the live input mode.
7 VCR button and indicator
Press this button to select the VCR playback input mode.
8 MON2 button and indicator
Press this button to set the output at monitor 2.
9 ZOOM button and indicator
In full screen display mode, press this button for a 2x
zoomed in image. Press the button one more time to cancel.
F STILL button and indicator
In full screen display mode, press this button to freeze the
displayed image. Press the button one more time to cancel.
G SEQUENCE button and indicator
In 4 divisions split screen or full screen display modes,
press this button for an automatic sequential full screen
display of the pictures.
H MENU button (see page 8)
Press this button to display the menus. Press repeatedly to
select the different menus in order.
I NEXT button
J EXIT/DISPLAY button
K j, l, c, d button
L +, – button
M ALL RESET button (see page 9)
N MENU RESET button (see page 9)
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
PLUS QUAD MULTI LIVE VCR
MENU
MON2 ZOOM STILL
SEQUENCE
NEXT
EXIT
DISPLAY
ALL
RESET
MENU
RESET
1234567HKI
M
N
LJGF98
SELECT
POWER
About the cooling fan
In order to keep the unit internal temperature low, a fan is
provided on the side of the unit. If the fan does not operate
properly, the POWER indicator will flash to indicate a problem.
Unplug the unit from the power supply and check to make sure
nothing is obstructing the fan. If after the power is restored to the
unit, the POWER indicator still flashes, do not use the unit and
consult your dealer.
L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31
English 3