Sanyo PLC-XU84 Projector User Manual


 
PRESENTATION POINTER
button
R-CLICK button
L-CLICK button
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the
remote control code.
MENU button
IMAGE button
RESET/ON/ALL-OFF
switch
Remote Control Code
Remote Control Code
Number of Times
Pressing IMAGE
Button
Code 1 1
Code 2
2
Code 3 3
Code 4 4
Code 5 5
Code 6 6
Code 7 7
Code 8 8
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse,
connect your computer and the projector with the supplied USB cable. See “Connecting to a Computer” on
page 17. When the Pointer function is used, the wireless mouse is not available.
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
Move the pointer on the screen
with this button.
Acts as right (click) mouse
button while the projector and a
computer are connected with a
USB cable.
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 51.
Press and hold the MENU and IMAGE buttons for
more than five seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGE button. See the list below.
1
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to “RESET,” and then to “ON.”
The initial code is set to Code 1.
2
14
Part Names and Functions