Filter
Top Products
Unit 4: Printer Configuration
LM408-412e Operator Manual
4-3 PN: 9001155A
DIPSWITCH SETTINGS
This chapter identifies the functions of the printer’s integrated dipswitches. The dipswitch complex is located on the
printer’s operator panel and is an integral part of its configuration by enabling/disabling various operational
features. Refer to the table below on switch designation and their specific functions.
ATTENTION: Each dipswitch must be set for the printer to properly function. Address
all eight switches individually, but some may not require change.
NOTE: A small, flat tool similar to a screwdriver is required to alter dipswitch position.
When changing a switch setting, ensure that it has been moved fully up or down.
NOTE: The switches are arranged horizontally, from left to right, and oriented
vertically. The ON position is always upward and the OFF position is always
downward.
DIPSWITCH FUNCTIONS
SWITCH SETTING DESCRIPTION
1
ON
OFF
Direct Thermal Printing
Thermal Transfer Printing
2
ON
OFF
Enable Eye-Mark Sensor
Enable Gap Sensor
3
ON
OFF
Enable Headcheck Feature
Disable Headcheck Feature
4
ON
OFF
Enable Hex Dump Feature
Disable Hex Dump Feature
5
ON
OFF
Enable Multi-Buffer Interface Receive Mode (periodic response)
Enable Single-Buffer Interface Receive Mode (ENQ response)
6
ON
OFF
Enable Download Mode Feature
Disable Download Mode Feature
7
ON
OFF
Enable Control Code Feature
Disable Control Code Feature
8
ON
OFF
Enable 203dpi Print Resolution
Enable 305dpi Print Resolution