Filter
Top Products
Unit 4: Printer Configuration
LM408-412e Operator Manual
4-24 PN: 9001155A
Is the first menu screen of the Motion (Move) Mode. This mode allows the print feed method to be
determined - Continuous or Tear-Off.
This screen allows the mode to be selected. If Continuous is selected, printing of labels occur
without pause for application.
If Tear is selected, printing will pause for each subsequent label until the previously printed label
has been removed for application.
Allows the pitch sensor to be enabled or disabled as preferred if continuous printing has been
selected. This option is not available for tear-off printing.
HISTORY CONTROL MODE (TABLE 4-7)
MENU DESCRIPTION
When enabled, the History Control Mode uses the printer’s recent operational history
as a way to control the heating temperature of head elements when printing the next
label. This is performed by using previous print activity as way to automatically
extrapolate the electricity required to reach the temperature needed and supplying only
amount.
Conversely, the Firmware applies electricity to the print head to heat its print elements
based on the assumption that the print head is cool and freshly powered on. However,
after a few print cycles, the print head retains heat from previous print activity and
requires time to cool down. If the Firmware continues to assume the print head has
cooled down to ambient temperature instantly after every print cycle, then the electricity
it applies to the print head would theoretically be excessive and result in overheating of
the ribbon.
Use the keys of the printer’s operator panel to select and enter the required options.
Is a display screen that informs when enabling/disabling has been completed.
PROTOCOL INITIALIZATION MODE (TABLE 4-8)
MENU DESCRIPTION
Initialization is automatic when the proper keys and switches are activated. This is the
only screen that will appear and will indicate that non-standard protocol code to be
returned to the default value. The default value is: STX (7BH), ETX (7DH), ESC (5EH),
ENQ (40H), NULL (7EH), CAN (21H), Offline (5DH), EuroCode (D5H).
MOVE MODE (TABLE 4-6)
MENU DESCRIPTION
MOVE MODE
MOVE MODE
CONT TEAR
PITCH SENSOR
ON OFF
HISTORY CONTROL
ON OFF
HISTORY CONTROL
COMPLETED
ALT. PROTOCOL
DEFAULT COMPLETE