Filter
Top Products
Unit 1: Introduction
LM408-412e Operator Manual
1-4 PN: 9001155A
CONTROL FEATURES
This chapter identifies the interactive control features of the printer. These functions are defined generally here.
More specific explanations will be found throughout this manual on how to use them.
OPERATOR PANEL FEATURES
LED DEFINITION
STATUS • Illuminates green when online and terminates when offline.
• Blinks green when receiving data or the buffer is hear full.
• Illuminates or blinks red when detecting a printer error.
KEYS DEFINITION
POWER Removes power supply at its entry to the printer.
LINE Moves the printer from an online to offline state and vise-versa, scrolls menu options, and
performs other special functions as identified in flow charts throughout this manual where
applicable.
FEED Advances the label media when pressed, selects menu options, and performs other special
functions as identified in flow charts throughout this manual where applicable.
POTENTIOMETERS DEFINITION
PRINT Adjusts the print density resulting in a lighter or darker print image.
OFFSET Adjusts forward or backfeed offset distance for peel, cut, or dispense operations.
PITCH Adjusts the print stop position.
DIPSWITCHES DEFINITION
DSW1 through 8 Enables/Disables various operational functions and performs other special functions as identified
in flow charts throughout this manual.
DSW1 ON: Direct Thermal Printing
OFF: Thermal Transfer Printing
DSW2 ON: Enable Eye-Mark Sensor
OFF: Enable Gap Sensor
DSW3 ON: Enables Headcheck feature
OFF: Disables Headcheck feature
DSW4 ON: Enables Hex Dump feature
OFF: Disables Hex Dump feature
DSW5 ON: Enables Multi-Buffer Interface Receive Mode (periodic repsonse)
OFF: Enables Single-Item Interface Receive Mode (ENQ response)
DSW6 ON: Enables Download Mode feature
OFF: Disables Download Mode feature
DSW7 ON: Enables Control Code feature
OFF: Disables Control Code feature
DSW8 ON: Enables 203dpi Print Resolution
OFF: Enables 305dpi Print Resolution