Filter
Top Products
Unit 4: Printer Configuration
LM408-412e Operator Manual
4-22 PN: 9001155A
Allows the selection of whether to accept the default setting or to set the backfeed distance (1-
255mm) other than the default setting.
Allows the backfeed distance to be set. If using thermal transfer for printing, set the feed distance
less than 30mm to avoid detection of the ribbon end by accident.
Allows the hexadecimal code to be specified for the character replaced replaced with the Euro
Character. The default is D5H.
Allows the selection of the character set used by the printer. The world’s primary commercial
languages are provided as options.
Allows the selection of which type of operator programming will take priority precidence. By
selecting the COMMAND option, downloaded command codes will be recognized by the printer
as most important where conflicting data exists.
Selecting LCD, places programming through the operator panel as taking precedence.
Allows the determination of whether to ignore the CAN and DLE commands used in bi-directional
communications. This menu option will only be applicable if multi-item buffer has been chosen.
Select the ENABLE option to set the printer to automatically notify when ribbon supply is nearly
exhausted.
This menu screen allows the pulse width to be set if single-item buffer has been chosen. If single-
item buffer has not been chosen, this setting will not have effect.
Allows of the backfeed movement to be established. Two setting options are available.
SERVICE MODE (TABLE 4-4)
MENU DESCRIPTION
FORWARD / BACKFEED
DISTANCE DEFAULT
FORWARD / BACKFEED
DISTANCE XXXMM
EURO CODE
D5
SELECT LANGUAGE
ENGLISH
FRENCH
GERMAN
SPANISH
ITALIAN
PORTUGESE
ENGLISH
ENGLISH
PRIORITY SETTING
COMMAND LCD
IGNORE CAN/DLE
YES NO
RIBBON NEAR END
ENABLE DISABLE
IEEE1284
ACK SIGNAL XX.X
BACKFEED SPEED
NORMAL SLOW