Filter
Top Products
Unit 4: Printer Configuration
LM408-412e Operator Manual
4-20 PN: 9001155A
ADVANCED MODE (TABLE 4-2)
MENU DESCRIPTION
Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
printer operational adjustments. Typically, once these adjustments or settings have been made,
they will not require additional address unless a new bob is downloaded.
Allows the darkness (print density) selection of the printed image. Has two selection options.
This menu allows for the printer to be configured to print zeros with or without a diagonal slash
through them. This will apply to all printer font types with the exception of Kanji font.
The printer can be set to automatically go into the online mode when powered on. Otherwise, the
printer starts in the offline state and must be manually placed online before it is ready to print.
Print offset refers to the vertical and horizontal shifting of the entire print area relative to the label
and the print start position. The movement is incremental by dots in the positive (+) or negative
(-) direction. Postive and negative vertical adjustment is toward and away from the print head
respectively. Positive and negative horizontal adjustment is to the left and right of the reference
point respectively.
The calendar is an optional feature that allows the date and time to be manually set using the
operator panel or through command codes. This screen will not be dispalyed if the calendar chip
is not installed.
This menu screen allows the operator to choose if the calendar settings are to be altered.
This menu screen allows the calendar settings to be altered. The calendar is divided into five sets
of two digits. The first two allows for the year to be set, followed by the month, the day, the hour,
then the minute.
Determines whether the print data code requires deletion. Hexadecimal graphic data will not be
deleted. Select YES to delete all carriage return (CR) and line feed (LF) commands in the data
stream - including graphics and 2D barcodes.
This feature is primarily used to maintain compatibility with earlier models of SATO printers.
This setting determines whether each printer character occupies a designated space (fixed)
regardless of the character’s width, or if the character’s space is representative of its width
(proportional).
Proportional is contemporarily preferred.
ADVANCED MODE
DARKNESS RANGE
A B
ZERO SLASH
YES NO
AUTO ONLINE
YES NO
PRINT OFFSET
V: +XXXX H: +XXX
SET CALENDAR
YES NO
CALENDAR
00 / 00 / 00 00:00
IGNORE CR/LF
YES NO
CHARACTER PITCH
PROP FIXED