SATO S8408 Printer User Manual


 
Unit 4: Printer Configuration
S8400 Series Operator Manual
4-20 PN: 9001160B
HEX DUMP MODE
The contents of the print buffer and the data received before it is placed into the print buffer may be examined
through the use of the Hex Dump Mode. Each line of the printed data is enumerated in the first column, the second
column contains the data in hexadecimal format, and the right column contains the same data in ASCII format.
The options of data to be printed are: receive data, receive buffer, and internal data. However, only one type of
data may be printed on a single label. Repeat the dump process to print the other data types as desired.
Use the keys on the printer’s operator panel to select and enter the required options. Refer to the Menu Definition
Tables in the following chapter to provide an explanation of each menu screen.
Figure 4-18, Hex Dump Mode
Hex
Dump is
printed
POWER
LINE
ENTER
Receive Data
ENTER
Receive Buffer
ENTER
Displayed
if password
feature is
enabled
PASSWORD
0000
ENTER
5 sec.
LINE
CANCEL
Cancels
print job
SELECT DUMP DATA
RECEIVE DATA
RECEIVE BUFFER
INTERNAL DATA
Internal Data
ENTER
OFFLINE
QTY: 000000
ONLINE
QTY: 000000
ONLINE MODE
CF Card
Mode
User
Mode
SEMBL MODE
Service
Mode
ADVANCED MODE
Service
Mode
Interface
Mode
HEX DUMP MODE