Filter
Top Products
Unit 4: Printer Configuration
S8400 Series Operator Manual
4-35 PN: 9001160B
Allows the maximum length of the label used to be defined. The default value varies depending
on head density: 8dot/mm = 0 to 2500mm, 12dot/mm = 0 to 1500mm, 24dot/mm = 0 to 400mm.
This screen will not appear if the Comaptibility Mode has been turned ON.
Allows the determination of copying firmware data to and from the ROM and optional CF Card.
The default setting is NO, meaning that copying is not desired.
Appears if the YES option was chosen on the preceding screen and allows the direction of
information flow to determined.
This screen confirms the selection from the preceding screen and allows the option of initiating
the copy or to abort.
This screen confirms the selection from the preceding screen and allows the option of initiating
the copy or to abort.
If Trace Mode is enabled, three different icons will appear on the LCD to trace the processing of a
label. The first identifies data reception, the second displays after receiving <ESC>A (1BH), and
the third displays following a print operation.
Permits determination of whether a record of print activity will be maintained on the CF Card.
Allows the record of print activity to be cleared if a log has been maintained.
Allows the print log to be output to the printer’s sub-port (port not used for print data) in real time.
The default is DISABLE.
By default, the I/F-2 card is set to be a sub-port for status monitoring purposes only. The main I/F
card is by default the data port for printing purposes. However, the roles of those two slots may be
exchanged at the DATA PORT menu screen.
Screen confirms that copying is in process and displays its progress status. A tinted field will
move laterally from the left toward the right as copying progresses. When the tinted bar reaches
100 on the scale, copying is complete.
This screen confirms the completion of the copy process and prompts for action to exit the
program.
SERVICE MODE (TABLE 4-9)
MENU DESCRIPTION
MEDIA LENGTH
XXXX MM
PROGRAM COPY
YES NO
PROGRAM COPY
CF CARD -> ROM
ROM -> CF CARD
CF CARD -> ROM
COPY START
YES NO
ROM -> CF CARD
COPY START
YES NO
TRACE MODE
ON OFF
SAVE PRINT LOG
ENABLE DISABLE
CLEAR PRINT LOG
YES NO
OUTPUT PRINT LOG
FROM SUBPORT
ENABLE DISABLE
COPYING
PROGRAM COPY
COMPLETE
PRESS ENTER
KEY