Filter
Top Products
Unit 4: Printer Configuration
S8400 Series Operator Manual
4-33 PN: 9001160B
This menu screen allows for the setting of the wireless LAN communication method. See your
network administrator for the proper setting.
Allows the unique wireless LAN SSID name to be configured in the printer. See your network
administrator for proper SSID settings.
Allows the wireless LAN channel to be set in the printer. The valid range is 01 to 14. See your
network administrator for the wirelss network channel.
SERVICE MODE (TABLE 4-9)
MENU DESCRIPTION
The Service Mode allows the programming of various dimensional settings, sensor thresholds,
and language options.
Permits sensitivity adjustment of the eye-mark sensor. The adjustment range is 1 to 99. The
default value is 50.
Permits adjustment of the sensor’s slice level. The slice level is the voltage at which the printer
determines media change from label to gap and vice-versa.
A setting of 0.0 to 3.2 volts is possible. The default is 1.4 volts. A setting of 0.0 volts causes the
printer to automatically determine the slice level.
Allows sensitivity adjustment of the gap sensor for different label materials. Increasing/
decreasing the level offset changes the sensor’s voltage value within a factory set range.
The adjustment range is 1 to 99. The default value is 50. Refer to the Adjustment Procedures unit
of this manual for detailed instructions.
Allows the sensor threshold (slice level) adjustment of the gap sensor. Ideally, the slice level
setting is at or near the mid-point between the low and high voltage readings from the previous
screen ((low voltage reading + high voltage reading)/2 = slice level setting).
A setting of 0.0 to 3.2 volts is possible. The default value is 1.2 volts. A setting of 0.0 volts causes
the printer to automatically determine the slice level.
This feature allows one label to be fed upon the printer entering the online mode. Enable or
disable as desired.
Allows it to be determined if the printer will feed a label when an error condition is cleared and the
printer goes online.
WIRELESS LAN INTERFACE MODE (TABLE 4-8)
MENU DESCRIPTION
WIRELESS MODE
802.11 Ad Hoc
Ad Hoc
Infrastructure
SSID
X
CHANNEL
XX
SERVICE MODE
SENSOR LEVEL
I-MARK X.XV
LEVEL OFFSET XX
SENSOR LEVEL
I-MARK X.XV
SLICE LEVEL XX
SENSOR LEVEL
GAP X.XV
LEVEL OFFSET XX
SENSOR LEVEL
GAP X.XV
SLICE LEVEL X.XV
AUTO ONLINE FEED
YES NO
FEED ON ERROR
YES NO