Filter
Top Products
1
Guide to Components
1.
Platen cover or document feeder
(ADF) (option)
Lower the platen cover over originals
placed on the exposure glass for copying.
If you have the document feeder, insert a
stack of originals here. They will be fed
automatically.
2.
Exposure glass
Position originals here face down for cop-
ying. See P.10 “Originals”.
3.
Internal tray
Copied paper is delivered here face
down.
4.
Ventilation hole
Prevents overheating. Do not obstruct
the ventilation hole by placing or leaning
an object near it. If the machine over-
heats, a fault might occur.
5.
Main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on. If it
is off, turn it on. However, if the machine
is installed with the fax option, do not
turn the main power off.
6.
Main Power indicator
This indicator lights up when the main
power switch is turned on, and goes off
when the switch is turned off.
7.
On indicator
This indicator lights up when the opera-
tion switch is turned on, and goes off
when the switch is turned off.