Filter
Top Products
43
3. Troubleshooting
If Your Machine does not Operate as You
Want
Message
Machine's Condition Problem/Cause Action
The machine instructs you to
wait.
The machine is warming up. Wait for the machine to warm-
up.
Reference
You can use Auto Start
mode during the warm-up
period. See P.35 “Auto
Start”.
The machine cannot detect the
original size.
Unsuitable original is set. See
P.11 “Sizes Difficult to Detect”.
Set custom size original on the
exposure glass.
Input the both horizontal and
vertical sizes of the non-stand-
ard original. See P.21 “Placing
Originals on the Exposure
Glass”.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/En-
large mode.
Original is not set. Set your originals.
The machine instructs you to
check the original direction.
There is no copy paper that is
the same direction as the orig-
inals.
Set the original in the same di-
rection as the copy paper.
The machine instructs you to
check paper size.
Unsuitable original size is set. Select the proper paper size.
You cannot enter the desired
copy set number.
The number of copies exceeds
the maximum copy quantity.
You can change the maximum
copy quantity that you can
make at a time. See “2.Max.
Copy Q’ty” in P.62 “Copier
Features”.
The machine instructs you to
enter the user code
(8-digit number).
Enter the user codes. See P.35
“User Codes”.