Filter
Top Products
59
4. User Tools (Copier Features)
Accessing the User Tools (Copier Features)
This section is for the key operators in
change of this machine. The user tools
allow you to change or set the ma-
chine's default settings.
Preparation
Always exit the user tools when
you have finished.
Reference
For how to access the system set-
tings, see “Accessing The User
Tools (System Settings)” in the
System Settings manual.
For information the Fax user tools,
see the Facsimile Reference manu-
al.
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
Press the 0
00
0 or 1
11
1 key to display
“3.Copier Features”, then press
the {
{{
{OK}
}}
} key.
C
Press the 0
00
0 or 1
11
1 key until de-
sired User Tools menu is dis-
played, then press the {
{{
{OK}
}}
} key.
D
Search for the desired setting
with the 0
00
0 or 1
11
1 key.
Note
❒ 1 key : Press to go to the next
menu.
❒ 0 key : Press to go back to the
previous menu.
Reference
See P.59 “User Tools (Copier Fea-
tures)”.
E
Change the settings by following
the instructions on the panel dis-
play. Then press the {
{{
{OK}
}}
} key.
Reference
See P.62 “Settings You Can
Change with the User Tools”.
Note
❒ {OK} key: Press to set the new
settings and return to the previ-
ous menu.
❒ {Cancel} key: Press to return to
the previous menu without
changing any data.
❒ The settings are not canceled
even if the power switch is
turned off or the {Clear Modes}
key is pressed.