Filter
Top Products
B Loading Paper
47
3
B
Loading Paper
Note
❒ If you want to change the paper
size, see P.54 “Changing the Paper
Size”.
Reference
Regarding paper types and sizes
that can be set, see P.13 “Copy Pa-
per”.
A
Make sure that the paper tray is
not being used.
B
Pull out the paper tray until it
stops.
C
Push the metal plate down, then
square the paper and set it in the
tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
D
Reinstall the back fence.
E
Push the paper tray in until it
stops.
Loading paper in the optional
paper tray unit
Note
❒ The optional paper tray unit has 2
types, 1–tray type and 2–tray type,
however the procedure for loading
paper is the same.
A
Make sure that the optional paper
tray unit is not being used.
B
Pull out the paper tray until it
stops.
C
While pinching the release lever,
adjust the back fence.
D
Square the paper and set it in the
tray.
ZENY150E
ZENY160E