Savin 2515 Printer User Manual


 
Copy Paper
15
1
Note
When you use the bypass tray, it is recommended to set the copy paper direc-
tion to L.
Postcards should be fed from the bypass tray.
If you load paper of the same size and in the same direction in two or more
trays, the machine automatically shifts to another tray when the tray in use
runs out of paper. This function is called Auto Tray Switch. This saves inter-
rupting a copy run to replenish paper even when you make a large number
of copies. You can cancel this setting. See “10Auto Tray Switch” of the System
Settings manual.
Reference
If you want to add paper, see P.47
B
Loading Paper”.
If you want to change the paper size, see P.54 “Changing the Paper Size”.
Non-recommended Paper
R
CAUTION:
Important
Do not use any of the following kinds of paper or a fault might occur.
Thermal fax paper
Art paper
•Aluminum foil
Carbon paper
Conductive paper
Do not use copy paper that has been already copied on. Otherwise, a paper
misfeed might occur.
Note
Do not use any of the following kinds of paper or a misfeed might occur.
Bent, folded, or creased paper
Torn paper
Slippery paper
Perforated paper
Rough paper
Thin paper that has low stiffness
Paper with much paper dust on its surface
If you make copies on rough grain paper, the copy image might be blurred.
Do not use paper which has been copied or printed on.
Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or equipment failure.