Filter
Top Products
Specifications
108
5
Note
r When using the Rotate Sort or Staple functions, the capacity may be re-
duced.
v Staple
• The following type of paper cannot be stapled:
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
•Curled paper
• Paper of low stiffness
•Paper of mixed sizes
• In the following cases, copies will be delivered to the shift tray without sta-
pling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When using Double Copies, or [1 Sided→1 Sided], [1 Sided→2 Sided], [2
Sided→1 Sided], or [2 Sided→2 Sided] in Combine mode, select K paper
for L original and L paper for K original.
• When using Double Copies, or [1 Sided 2 Pages→ 1 Sided Combine] and
[1 Sided 4 Pages→ 2 Sided Combine] in Combine mode, select K paper for
L original and L paper for K original.
• When using [Left 2] or [Top 2] with Double Copies, or [1 Sided→1 Sided],
[1 Sided→2 Sided], [2 Sided→1 Sided], or [2 Sided→2 Sided] in Combine
mode, select K paper for L original and L paper for K original.
• When the booklet finisher is installed, even if you place different size orig-
inals in the ADF, appropriate size of copy paper can be automatically se-
lected and stapled using the Mixed Size mode and Auto Paper Select
function. Load the paper you want to use in the paper trays beforehand.
Paper sizes that can be stapled when using the Mixed Size mode are as fol-
lows:
•A3L and A4K
•B4 JISL and B5 JISK
• 11" × 17"L and 8
1
/
2
" × 11"K