Savin 4045e All in One Printer User Manual


 
Copying
16
2
Interrupt Copy
Use this function if you want to inter-
rupt a long copy job to make urgently
needed copies.
Limitation
r You cannot use the Interrupt Copy
function when fax originals are be-
ing scanned or the scanner func-
tion is being used.
A Press the {Interrupt} key.
The Interrupt indicator goes on.
When the originals stop scanning
A Remove the originals that were
being copied and place the
originals you want to copy.
B Press the {Start} key.
The machine starts making the
copies.
C When copying is complete, re-
move the originals and copies.
D Press the {Interrupt} key again.
The Interrupt indicator goes off.
E When the display prompts
you, place the remaining origi-
nals again before interrupting.
F Press the {Start} key.
Note
r The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
A Place the originals you want to
copy.
B Press the {Start} key.
The machine stops the previous
original job and starts copying
the original.
C When copying is complete, re-
move originals and copies.
D Press the {Interrupt} key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
r See p.92 “Tone: Original remains”.