Filter
Top Products
41
4
Wiring and I/O
At a Glance
Introduction This chapter describes and illustrates all power wiring connections, all signal wiring
connections, and I/O wiring connections on the 17S drive. Power and signal wiring
connections are:
l AC mains power through a four-position, plug-in, terminal block connector
l Bias power through four-position, plug-in, terminal block connector
l Serial power connections among multiple drives
l Servo motor power through a six-position, plug-in, terminal block connector
l Optional Regen power resistor through a four-position, plug-in, terminal
block connector
l Resolver feedback input through a nine-pin, plug-in, Sub-D connector
l Encoder feedback input through a 15-pin, plug-in, Sub-D connector
l Auxiliary encoder interface through a nine-pin, plug-in, Sub-D connector
l Fiber optic Interface through two SMA connectors
l Analog in and digital I/O through an 18-position, plug-in terminal block
connector
l Serial communications interface through a nine-pin, plug-in, Sub-D
connector
Continued on next page