47
Cable Shield Connections
Connecting
Cable Shields to
the Front Panel
The following procedure and associated diagram describe how to connect cable
shields to the front panel of the 17S drive:
Continued on next page
Step Action
1
Remove a length of the cable’s outer covering and braided shield sufficient to
expose the required length of wires.
2
Secure the exposed wires with a cable tie.
3
Remove approximately 30 mm of the cable’s outer covering while ensuring the
braided shield is not damaged during the process.
4
At the front panel of the drive, insert a cable tie into a slot in the shielding rail.
5
Use the previously inserted cable tie to secure the exposed braided shield of
the cable firmly against the shielding rail.